As a base it provides an entire world of possibilities: whipped into a parfait, colored and layered, as a shaving butter, as a sugar or salt scrub! The list is endless. Easily add essential oils, fragrant oils, other natural butters, other cream and lotion bases…with this product you are limited only by your imagination!

Try playing with the following:

• Carrier Oils - adding up to 2oz (60ml) of a carrier oils (try any of them - Grape Seed, Evening Primrose, Sweet Almond, Avocado or Sea Buckthorn if you're looking for a really exotic product!) per pound of base has made the foaming bath butter more moisturizing, particularly on products being applied to the face.

• Sugar / Salt - Sugar or salt can be added until the product becomes supersaturated. Once the salt or sugar stops melting, it will remain in crystal form and act as a wonderful exfoliater.

• Fragrance - The Foaming Bath Butter is incredibly robust, and will accept a fragrance load of up to 5% essential oil or fragrant oil. Consumer applications indicate a load of 2 to 3% is preferred.

• Other Butters and Bases - Try adding Shea, Mango or Cocoa Butter, or try adding some of our exotic Amazonian Butters! The Foaming Bath Butter will also accept small amounts of other creams, lotions, and moisturizers!

Experimenting is Half the Fun! Using it and selling it is the other half!

Some suggested uses are:

• Sugar Scrubs
• Salt Scrubs
• Body Meringues
• Body Parfaits
• Exfoliating Scrubs

Please note: the product will double in volume when whipped using a blender or cake mixer. However, it can collapse if whipped to more than double its original volume.

Basic Parfait Sample Recipe:

• 2 Pounds Foaming Bath Butter
• 4 Oz of Sweet Almond Oil (2 oz per pound of Foaming Bath Butter)
• Color to suit
• Fragrance or Essential Oil to suit

Cut 2 Pounds of the Foaming Bath Butter and place in a mixing bowl. Using a cake mixer, slowly break down the product into a soft, consistent form. Add 4 oz of the Sweet Almond for extra moisturizing properties and start mixing at a higher speed until the product doubles in volume. Simply add color and fragrance to suit, and voila! You have created an exotic bath parfait with endless possibilities. Place in your open container of choice and allow 24 hours for the product to set. If you’re feeling really adventurous, try layering different colors and selling as a Foaming Body Parfait!

Processing Conditions

1. Remove product from the plastic drum.
2. Transfer to a suitable vessel equipped with a heating and cooling facility and agitator.
3. Gently heat the product to 140 degrees Fahrenheit (60 degrees C.) and when melted, start the agitator.
4. When fully mixed, add dye and additives.
5. Cool to approx. 122 degrees Fahrenheit (50 degrees C).
6. Add perfume.
7. Pour into suitable containers with continuous stirring.
8. Allow product to solidify.

**Under no circumstances should this product be discharged at temperatures higher than 122 degrees Fahrenheit (50 degrees C.); 118 degrees F is the preferred temperature. At temperatures below 113 degrees Fahrenheit (45 degrees C.), the product hardens.

Ingredients:: Aqua, Glycerin, Sodium Cocoyl Isethionate, Sorbitol, Disodium Lauryl Sulfosuccinate, Sodium Chloride, Phenoxyethanol, Tetrasodium EDTA.

Click Here for Foaming Bath Butter INCI Ingredients

soap bases, melt & pour soap bases, m&p, melt and pour soap bases, soap supplies, soap making supplies