MATERIAL SAFETY DATA SHEET

 

1. Product Identification:

Product Name:                

Sodium Bicarbonate

Chemical Formula:

NaHCO3

Synonyms:

Sodium hydrogen carbonate, baking soda

INCI Name:

Sodium bicarbonate

CAS #:                           

144-55-8

County of Origin:          

Canada

 

2. Classification:

UN No. 3077: Other regulated substances, solid   

Guide 171: Substances (Low to Moderate Hazards)   

24 HOUR EMERGENCY TELEPHONE NUMBER: (613)-996-6666 CANUTEC 

         

3. Hazardous Ingredients Information:

Acute irritant.

 

4. Physical & Chemical Properties:

Appearance:                   

White to off-white powder.

Odor:                              

Odorless.

Solubility:

Partially soluble in cold water / hot water.

Bulk Density:            

65 – 70 lbs/ft3

Loss on Drying:

<0.25 %

Assay:

99.5 – 100.5 %

Chloride:

<150 ppm

Sulfate:

<150 ppm

Arsenic:

<2 ppm

Heavy Metals:

<5 ppm

Constituents:

 

May contain traces of chloride, sulfate and arsenic.

 

5. Fire/Explosion Hazard:

Flash Point:   NA

Non-flammable solid.

 

6. Reactivity/Stability Data:

Reactivity: Stable at room temperature. Always avoid contact with strong oxidizing agents, alkali and acids.

Decomposition: When heated to decomposition, the smoke may contain carbon monoxide and residual zinc.

 

7. Toxicological Properties/Information:

Acute irritant – small particles will irritate skin and eyes. May cause dry throat, dry itching skin or dry cough.

8. CAUTION:

ACUTE RESPIRATORY IRRITANT.

 

9. Preventive Data:

Spillage: Absorb spills, cover with an inert, non-combustible, inorganic absorbent material, and remove to an approved disposal container.

Fire: Recommended extinguishing media – CO2, foam and dry chemicals. DO NOT use direct water jet on burning material.

Environment: Keep away from drains, surface and ground water.

Storage: Store in cool, dry, well ventilated area protected in tightly closed container away from sources of ignition, heat and light or direct sunlight. Keep air contact to minimum.

 

10. First Aid Measures:

Eye contact: Flush with water for at least 15 minutes. Call physician if irritation persists.

Inhalation: Remove to fresh air. Avoid casual breathing.

Ingestion: Rinse mouth and consult a physician immediately. Never-give anything by mouth if victim is unconscious, is rapidly-losing consciousness, or is convulsing.

Skin contact: Remove contaminated clothing. Wash with soap and plenty of water.

 

11. Individual Protection for Industrial Use:

Always use a safety goggles.

Handle in a well ventilated area, and avoid breathing in vapor directly by using a vapor respirator.

Always avoid skin contact with concentrated product by wearing a lab overall and chemical resistant or surgical gloves.

 

12. Other Regulatory Information:

WHMIS (Canada):

Non-combustible solid.

 

HMIS (USA):

Health Hazard – 1

Fire Hazard – 0

Reactivity – 0

Personal Protection – E

 

Risk Phrases:

R22 – Harmful if swallow.

R36/38 – Irritating to eyes/skin.

 

13. Preparation Information:

Quality Assurance

New Directions Aromatics Inc.

21-B Regan Road,

Brampton, ON

L7A 1C5, Canada                                                                         

 

Date Revised: 25th July 2008

 

 

Disclaimer

 

The information contained in this Certificate of Analysis and Material Safety Data Sheet are obtained from current and reliable sources.  As the ordinary or otherwise use(s) of this product is outside the control of New Directions Aromatics Inc., no representation or warranty, expressed or implied is made as to the effect(s) of such use(s) (including damage or injury), or the results obtained.

 

New Directions Aromatics Inc. expressly disclaims responsibility as to the ordinary or otherwise use(s).  Furthermore, New Directions Aromatics as to the fitness for any use should consider nothing container herein as a recommendation.  The liability of New Directions Aromatics Inc. is limited to the value of the goods and does not include any consequential loss.

 

 

CERTIFICATE OF ANALYSIS

 

Product: Sodium Bicarbonate

 

 

Product No: 16021                                                                                  Lot No:  16021-A09

 

 

 

Specifications:

Results:

Appearance:                   

White to off-white powder.

Complies

Odor:                              

Odorless.

Complies

Solubility:

Partially soluble in cold water/ hot water.

Complies

Bulk Density:            

65 – 70 lbs/ft3

Complies

Loss on Drying:

<0.25 %

Complies

Assay:

99.5 – 100.5 %

Complies

Chloride:

<150 ppm

Complies

Sulfate:

<150 ppm

Complies

Arsenic:

<2 ppm

Complies

Heavy Metals:

<2 ppm

Complies